
Phone Based Administration
Page 310
- Issue 6a (Thursday, February 22, 2018)
IP Office Basic Edition
Comments on this document? [email protected]
17.10 System Upgrade
In order to upgrade the software being used by the phone system, the maintainer may provide the new software on an
SD card. This process can be used to copy that software to the SD card used by the system.
This process copies the software files in the
\system\primary
folder on an SD card inserted into the system's
Optional
SD
card slot to the same folder on the SD card in the system's
System SD
card slot. The system will then be restarted
using those files.
·
!
WARNING
This process will restart the phone system and disconnect all currently connected calls.
·
This process takes approximately 10 minutes or more and should not be interrupted once started.
·
This procedure is not listed when using the
Next Procedure
or
Previous Procedure
buttons to select a
procedure.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press
Admin
.
·
To do the above during a call, you may need to press the
PHONE
button to display the
Admin
soft key
option. If you access phone administration during a call, only the
SPEAKER
,
MUTE
and
HEADSET
buttons still affect the connected call.
2. Use the
up or down
arrow buttons to scroll the display to
System Administration
. When highlighted, press
Select
.
3. Dial
#731
. The display will show
System Upgrade:
. Press
Proceed
to start the upgrade. The phone will display
Upgrade In Progress
.
4. If the upgrade fails, the telephone display will give the reason.
·
Shutdown and Insert Card
There is no SD card in either the
Optional SD
or the
System SD
card slot.
·
Upgrade Failed: Try Again
This message indicates that there was some problem. For example the card in the phone system's System SD
card slot was removed during the upgrade or the card has become corrupted.
·
System Busy
Another backup, restore, upgrade or copy was already in progress at the time the manual process was
requested.
5. If the upgrade is successful, the system will be restarted.
·
Exit programming by pressing
PHONE
. Alternatively use the
Back
button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
Feature **config
(ie.
Feature **266344
).
·
set, it is requested. Enter the password.
2. The phone displays
System Admin
.
3. Dial
#731
. The phone displays
System Upgrade
.
4. Press
Enter
to start the upgrade. The phone will display
Upgrade In Progress
.
5. If the upgrade is not successful, the display will indicate the probably cause:
·
Shutdown and Insert Card
There is no SD card in either the
Optional SD
or the
System SD
card slot.
·
Upgrade Failed: Try Again
This message indicates that there was some problem. For example the card in the phone system's System SD
card slot was removed during the upgrade or the card has become corrupted.
·
System Busy
Another backup, restore, upgrade or copy was already in progress at the time the manual process was
requested.
6. If the upgrade is successful, the system will be restarted.
·
To exit phone based administration at any time, press the
Release
button. To select a different process use the
Next Procedure
or
Previous Procedure
buttons or dial another feature code.
114