Avaya Interaction Center, Programmer'S Manual, Page: 116 / 138

The vtel.ini configuration file
116 VTel Programmer Guide
# ----------------------------------------------------------------
# Describes the bitmaps used for each button, in each state.
# This only applies if your interface uses bitmap buttons.
# Choices must be made from the list of available bitmap pictures.
# Refer to each GUI design for locations of each button. If the
# button number does not appear on a particular GUI design, the
# information here will be ignored.
# ----------------------------------------------------------------
[buttons]
# Button AvailableUp AvailableDown Disabled
# ------ ----------- ------------- ------------
1 readyphone readyphone_ readyphone-
2 ring answer_ answer-
3 hangup readyphone_ hangup-
4 closedbook notready_ closedbook-
5 incall onhold_ onhold-
6 cardfile cardfile_ cardfile-
7 directory directory_ directory-
#7 paperclip paperclip_ paperclip-
#7 stophand redlight_ blank-
#7 keypad keypad_ keypad-
# ----------------------------------------------------------------
# The text label associated with each bitmap button.
# This only applies if your interface uses bitmap buttons with
# labels appearing adjacent to the buttons.
# All text after the label identifier will be used, beginning with
# the first character. Only leading and trailing spaces are
# trimmed. A missing label entry will result in an invisible label.
# ----------------------------------------------------------------
[labels]
1 Ready
2 Answer
3 Hang up
4 Busy
5 Hold
6 WrapUp
7 Directory
#7 Logout
#7 Messages
#7 DTMF
# ----------------------------------------------------------------
# The text label associated with each standard push button.
# All text after the label identifier will be used, beginning with
# the first character. Only leading and trailing spaces are
# trimmed. A missing label entry will result in an unlabeled
# button. The label numbers correspond to button numbers.
# ----------------------------------------------------------------
Currently the standard VTel GUI only provides bitmap buttons (see the preceding set of
options). The following options are inactive in that case.
[buttontext]
1 &Hold
2 &Transfer