Avaya callpilot 1002rp, Maintenance And Diagnostics

Page: 53 / 150

Section Description
This section appears only for components on which you are
allowed to run diagnostics.
For more information about running diagnostics, see the
following sections:
• Running integrated diagnostics on page 58
• Viewing the last diagnostic results on page 60
Maintenance activities for each component
The following table identifies the maintenance activities you can perform for each component
that is listed in the component tree.
Table 14: Maintenance activities
Component Start, stop? Courtesy
stop?
Diagnostics
available?
Replaceable?
Media Bus Yes No Yes No
MPB96 board Yes No Yes Yes
Time Switch No No No No
MPCs (embedded on
MPB boards) Yes No Yes embedded: No
Multimedia channels Yes Yes Yes No
Call channels Yes Yes No No
DS30X link Yes No No No
Note:
The MGate card and DS30X cable are replaceable. If you are having problems with the
DS30X link, determine if either one or both of these items are causing the problem and
need to be replaced.
Viewing component states
View a component state to determine the general condition of the component, including
whether the component is disabled or off duty. The component state is shown in the
Maintenance section of the Maintenance screen.
Maintenance activities for each component
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics December 2010 53