Avaya callpilot 1002rp, Maintenance And Diagnostics

Page: 111 / 150

Power up the server and click Ctrl+M to enter the utility.
2. Select Objects → Adapter → Other Adapter to set the following:
a. Set Force Boot to On.
b. Set Auto-Rebuild to Disabled.
c. Select Objects → Channel and ensure channel speed is 160M. ((Default
for LSI320 is 320M).
d. Repeat for all channels.
3. Exit the utility and reboot the server.
4. Set the server to boot from CD.
5. Insert the RAID Update Utility CD and reboot the server.
Result: The DOS boot menu appears.
6. Select Update LSI320-2 Firmware.
Result: The system will prompt twice to confirm you are upgrading the firmware.
7. Answer Y to both questions.
Result:The system upgrades the firmware and asks you to reboot.
8. Allow the system to reboot to Windows 2003.
9. Insert the RAID Update Utility CD and unzip the RAIDUP.EXE file.
Result: A directory called RAIDUP is created on C:\ drive
10. Locate SCSI controllers → LSI Adapter in the RAIDUP directory. Double click on it,
then select Driver.
Result: You are asked to choose the Upgrade Driver.
11. Point to the c:\raidup\Win2k3 folder.
12. The system asks you to reboot.
Result: The system reboots to Windows 2003.
13. Check the driver, firmware and Power Console configuration.
a. Open the MegaRAID Power Console from the Start → Programs menu.
b. Select Help About from the menu and verify the MegaRAID Power
Console version is 5.00i.
c. Select Adapter → Properties and verify the firmware version is 1L37 or
1L51 and the board type is LSI320-2.
d. Exit the Power Console.
14. Right click on C:\WINNT\SYSTEM32\DRIVERS\mraid3xx.sys and select
Properties → Version. Verify the Driver version is 6.45 or 6.51.
Replacing the LSI1600 or LSI320-2 card with LSI320-2
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics December 2010 111