Avaya callpilot 1002rp, Maintenance And Diagnostics

Page: 35 / 150

Nbtstat command syntax
The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n] [-R] [-r] [-S] [-s]
[interval]
nbstat command parameters
Table 7: nbstat command parameters
Parameter Description
-a remotename Lists the remote computer name table using its name.
-A IP address Lists the remote computer name table using its IP address.
-c Lists the contents of the NetBIOS name cache giving the IP
address of each name.
-n Lists local NetBIOS names. Registered indicates that the name
is registered by broadcast (Bnode) or WINS (other node types).
-R Reloads the LMHOSTS file after purging all names from the
NetBIOS name cache.
-r Lists name resolution statistics for Windows networking name
resolution. On a Windows computer configured to use WINS,
this option returns the number of names resolved and registered
through broadcast or through WINS.
-S Displays both client and server sessions, listing the remote
hosts by IP address only.
-s Displays both client and server sessions and attempts to
convert the remote host IP address to a name using the HOSTS
file.
interval Displays selected statistics, pausing interval seconds between
each display. Press Ctrl+C to stop displaying statistics. Without
this parameter, nbtstat prints the current configuration
information once.
To run the nbtstat command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
Nbtstat command syntax
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics December 2010 35