manualshive.com logo in svg

Avaya callpilot 1002rp, Maintenance And Diagnostics

Share
Download
Avaya callpilot 1002rp Maintenance And Diagnostics Download Page 50

Each alarm in the Alarm Monitor has Help text that often provides a solution to the problem. If
the solution is not apparent, use the Event Browser or the Maintenance screen to further
investigate the problem.

To investigate using the Alarm Monitor

1. Run CallPilot Manager and log in.
2. In CallPilot Manager, click System→Alarm Monitor.

Result: The Alarm Monitor screen appears.

3. Click the Event Code for the first Critical or Major alarm.

Result: A description of the event appears in a new web browser window.

4. Review the description and recovery action.
5. Repeat steps 

 3

 on page 50 and 

 4

 on page 50 for more alarms, if necessary.

6. If the solution to the problem is not apparent, obtain the return code of the first event

and continue the investigation by using the Event Browser (see 

Event Browser

 on

page 50).

Event Browser

Use the Event Browser to investigate a series of events that occurred around the time an alarm
was raised. The event listing can help you determine the root cause of a problem.

About events

The Event Browser displays events that have been recorded in the server log. Each event
identifies the time the event occurred, the object that generated the event, and the cause of
the event.

Events are classified as Information, Minor, Major, or Critical. By default, the Event Browser
displays only the latest 100 critical events.

To investigate using the Event Browser

1. Run CallPilot Manager and log in.
2. In CallPilot Manager, click System→Event Browser.

Result: The Event Browser screen appears.

3. Click an event that appears to be related to the problem, or an event that occurred

near the time the alarm was raised.

Result: A description of the event appears in a new web browser window.

Using Avaya CallPilot® Manager to monitor hardware

50     Avaya CallPilot® 1002rp Server Maintenance and Diagnostics

December 2010

Summary of Contents for callpilot 1002rp























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands