manualshive.com logo in svg

Avaya callpilot 1002rp, Maintenance And Diagnostics

Share
Download
Avaya callpilot 1002rp Maintenance And Diagnostics Download Page 117

4. Bring the drives on channel 2 online (the drives on which the previous CallPilot

release is installed).

a. Select Objects → Physical Drive.
b. Select CH2 ID0 (A01-02) and press Enter.

c. Select Make Online and press Enter.

d. Select Yes to confirm that the driver must be brought online and press

Enter.

e. Repeat these steps for each remaining drive on channel 2: CH2 ID1

(A02-02) and CH2 ID2 (A03-02).

5. Press Esc to return to the Objects menu.
6. Press Esc to return to the Management menu.
7. Press Esc to exit the RAID configuration utility.

Result: A confirmation box appears.

8. Click Yes to confirm that you want to exit the RAID configuration utility and press

Enter.

9. Press Ctrl+Alt+Delete to reboot the server.

Synchronizing RAID drives

Avaya CallPilot® 1002rp Server Maintenance and Diagnostics

December 2010     117

Summary of Contents for callpilot 1002rp























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands