Avaya callpilot 1002rp, Maintenance And Diagnostics

Page: 60 / 150

Result: The Maintenance screen refreshes to show details about the component.
6. Scroll down to the Maintenance section, and ensure that the component is out of
service.
7. Scroll down to the Diagnostics section.
8. Select the check box for each diagnostic that you want to run.
Note:
If you want to run all of the diagnostics, select the Diagnostic Description check
box at the top of the list.
9. Click Run.
Result: A new web browser window opens to display the progress and results of
the diagnostics.
Note:
The Diagnostic Results box in the Diagnostics section displays diagnostic results
when you click Get Last Result.
Viewing the last diagnostic results
You can review the results of diagnostics by clicking the Get Last Results button for a
component.
To view the last diagnostics result
1.
Important:
Avaya recommends that you courtesy stop rather than stop a component if
possible. For instructions, see Starting and stopping components on page 55.
Run CallPilot Manager and log in.
2. In CallPilot Manager, click Maintenance→Maintenance Admin.
Result: The Maintenance screen appears.
3. Click the plus sign (+) beside the CallPilot server to expand the component tree.
4. Continue clicking the plus sign (+) until the component with which you want to work is
visible.
5. Click the hardware component for which you want to run diagnostics.
Result: The Maintenance screen refreshes to show details about the component.
6. Scroll down to the Diagnostics section.
Using Avaya CallPilot® Manager to monitor hardware
60 Avaya CallPilot® 1002rp Server Maintenance and Diagnostics December 2010