manualshive.com logo in svg

Avaya Aura System Platform, Installing And Configuring, Page: 10 / 104

Share
Download
Avaya Aura System Platform Installing And Configuring Download Page 10

PLDS

The System Platform downloadable software, the solution templates to run on System Platform

and the licenses for installing the solution templates are available in the PLDS (Product

Licensing and Delivery System) Web site (http://plds.avaya.com).

Secure Access Link (SAL)

System Platform includes Avaya's Secure Access Link (SAL) gateway to manage service

delivery (alarming and remote access). SAL requires upload bandwidth (customer to Avaya)

of at least 90 KB/s (720 KB/s) with latency no greater than 150 ms (round trip.)

You must configure SAL with the customer's network and register during the installation

process. For Avaya to provide support, Business Partners and/or their customers need to

ensure that SAL is configured and registered properly. Avaya support will be delayed or not

possible if SAL is not properly implemented.

Business Partners without a SAL Concentrator must provide their own B2B VPN connection

(or other IP-based connectivity) to deliver remote services. SAL does not support modem

connections.

Pre-installation checklist for System Platform

Being prepared for the installation makes it go faster. Before starting the installation make sure

that you complete the following tasks.

Task

Notes

Gather the required information relating to installation,
such as IP configuration information, DNS addresses,
NTP server addresses.
See 

Installation worksheet for System Platform

 on

page 20.

Download the System Platform installer ISO image file
from PLDS
See 

Downloading the System Platform and solution

template software from PLDS

 on page 13.

Download the appropriate solution template software
from PLDS
See 

Downloading the System Platform and solution

template software from PLDS

 on page 13.

Verify that the downloaded ISO image matches the
one on the PLDS Web site
See 

Verifying the ISO image on a linux machine

 on

page 23 and 

Verifying the ISO image on a Windows

machine

 on page 24.

System Platform installation

10     Installing and Configuring Avaya Aura

™

 System Platform

April 2010

Summary of Contents for Aura System Platform









































































































Reviews:

No comments