manualshive.com logo in svg

Avaya Aura System Platform, Installing And Configuring, Page: 75 / 104

Share
Download
Avaya Aura System Platform Installing And Configuring Download Page 75

Chapter 9:  Installing a solution template

Template installation

After installing System Platform, install the solution templates such as Midsize Business
Template, Modular Messaging and so on.

After installing the templates, manage the templates from the System Platform Management
Console.

 Note:

The procedures for installing a template can be different depending on the template. See

respective template documentation to verify the template installation steps.

Selecting a template to install

 Note:

This operation is not supported on the system running in High Availability Failover Mode. To

proceed to install, stop the High Availability Failover Mode.

See 

System Platform High Availability Failover overview

 on page 83 for more information.

1. Log on to System Platform Management Console.

2. Click 

Virtual Machine Management

 > 

Solution template

.

The system displays the 

Virtual Machine Management

 page. Use this page to

select a template that you want to run on System Platform, for example, Midsize
Business Template.

Installing and Configuring Avaya Aura

™

 System Platform

April 2010     75

Summary of Contents for Aura System Platform









































































































Reviews:

No comments