Avaya Aura System Platform, Installing And Configuring, Page: 90 / 104

The system displays output similar to the one shown below:
6. Create a new primary partition by typing
n
Select primary partition by typing
p
.
Give partition number
l
.
Accept the defaults for the cylinder information (the partition takes up the whole
drive space.)
The system displays output similar to the one shown below:
7. Verify the partition information by typing
p
.
The system displays output similar to the one shown below:
8. Change the partition type from default of Linux to W95 FAT32 by typing
t
.
Give partition number
l
.
Type partition type
L
to list the partition type codes.
Type
b
as the required partition type code.
Using USB drive for System Platform installation
90 Installing and Configuring Avaya Aura
™
System Platform April 2010