Avaya Aura System Platform, Installing And Configuring, Page: 21 / 104

Field Value/requirement Notes
Secondary DNS Optional
NTP Server 1 Use of NTP server is optional.
However, Avaya
recommends its use.
NTP Server 2 Optional
NTP Server 3 Optional
eth1
This is a physical Ethernet interface (NICs) on the server. You must configure these interfaces
for IP. The table shows the default settings for the Services port. Avaya recommends keeping
these default settings.
Field Value/requirement Notes
Static IP 192.11.13.6
Subnet mask 255.255.255.252
Default gateway IP
Passwords
Default passwords are provided. You should change these default passwords.
Field Value/requirement Notes
root
admin
cust
ldap
Preparing for installation
You can use a DVD or a USB flash drive for installing System Platform. After you decide your
preferred media for installation, you must set up the DVD or the USB flash drive for the
installation. You must also verify the ISO image after downloading from the PLDS site. The
flow of tasks for preparing yourself for the installation is as follows:
• Set up the media to install the software. Do one of the following depending on your
preferred media:
- Setting up a USB flash drive for System Platform installation on page 23.
- Setting up a DVD for System Platform installation on page 22.
Preparing for installation
Installing and Configuring Avaya Aura
™
System Platform April 2010 21