manualshive.com logo in svg

Avaya Aura System Platform, Installing And Configuring, Page: 48 / 104

Share
Download
Avaya Aura System Platform Installing And Configuring Download Page 48

1. Open your Internet browser.

2. Click 

Tools

 > 

Internet Options

.

3. Click the 

Connections

 tab.

4. Click 

LAN Settings

, then click 

Advanced

.

5. Deselect the 

Use a proxy server for your LAN

 option. Select the option when you

are done to enable the proxy server.

6. Click 

OK

 to close each dialog box.

Installing System Platform software

Starting the installation

1. Turn on the server.

2. Perform one of the following tasks:

• Insert the System Platform DVD into the DVD-ROM drive.

• Connect the System Platform USB flash drive to the USB port.

If USB flash drive is selected for installing System Platform, the boot up sequence
must be changed for the server to boot from the USB flash drive. Therefore, monitor
and keyboard are required. The server boots up from the System Platform DVD or
USB flash drive and displays the Avaya screen. Wait till the system disables the
installation through the server console and enables installation through the services
port. At this stage the system displays the Waiting for telnet connection screen, so
that you can connect to the server through telnet.

Installing System Platform using laptop

48     Installing and Configuring Avaya Aura

™

 System Platform

April 2010

Summary of Contents for Aura System Platform









































































































Reviews:

No comments