Avaya 4524GT, Configuration Manual

Page: 272 / 362

Viewing basic system bridge information using EDM
Use this procedure to display system bridge information, including the MAC address, type, and
number of ports participating in the bridge.
Procedure steps
1. From the navigation tree, double-click Edit .
2. In the Edit tree, double-click Bridge .
3. On the work area, click the Base tab.
Variable definitions
Variable Value
BridgeAddress Indicates the MAC address of the bridge when it is
uniquely referred to. This address must be the
smallest MAC address of all ports that belong to the
bridge. However, it must be unique. When
concatenated with dot1dStpPriority, a unique bridge
ID is formed that is then used in the Spanning Tree
Protocol.
NumPorts
Indicates the number of ports controlled by the
bridging entity.
Type Indicates the type of bridging this bridge can perform.
If the bridge is actually performing a certain type of
bridging, this fact is indicated by entries in the port
table for the given type.
Viewing transparent bridge information using EDM
Use this procedure to display information about learned forwarding entry discards and to
configure the aging time.
System configuration using Enterprise Device Manager
272 Configuration — System April 2011