Avaya 4524GT, Configuration Manual

Page: 171 / 362

Variables Description
config notification
Set the config notification to its default value
(disabled).
status
Set the LLDPU transmit and receive status to the
default value (txAndRx).
default lldp med-network-policies command
The
default lldp med-network-policies
command configures LLDP MED policies
for switch ports to default values. The syntax for the
default lldp med-network-
policies
command is:
default lldp med-network-policies [port <portList>] {voice|voice-
signaling}
Run the
default lldp med-network-policies
command in Interface Configuration
command mode.
The following table describes the variables for the
default lldp med-network-
policies
command.
Table 83: default lldp med-network-policies command variables
Variable Value
port <portlist>
Specifies the port or ports on which to configure
default LLDP MED policies.
voice
Specifies the default voice network policy. The default
value is 46.
voice-signaling Specifies the default voice signalling network policy.
default lldp tx-tlv command
The
default lldp tx-tlv
command sets the LLDP Management TLVs to their default
values. The syntax for the
default lldp tx-tlv
command is
default lldp tx-tlv [port <portlist>][port-desc] [sys-name] [sys-
desc] [sys-cap] [local-mgmt-addr]
Run the
default lldp tx-tlv
command in Interface Configuration command mode.
The following table describes the variables for the
default lldp tx-tlv
command.
Configuring LLDP using ACLI
Configuration — System April 2011 171