Avaya 4524GT, Configuration Manual

Page: 174 / 362

Table 87: default lldp tx-tlv med command variables
Variables Description
port <portlist> specifies the ports affected by the command
med-capabilities MED Capabilities TLV (MED TLVs are
transmitted only if MED Capabilities TLVs
are transmitted). This TLV is enabled by
default.
extendedPSE Extended PSE TLV This TLV is enabled by
default.
inventory Inventory TLVs This TLV is enabled by
default.
location Location Identification TLV This TLV is
enabled by default.
network-policy Network Policy TLV This TLV is enabled by
default.
no lldp port command
The
no lldp port
command disables LLDP features on the port. The syntax for the
no
lldp port
command is
no lldp [port <portlist>] [config notification] [status]
Run the
no lldp port
command in Interface Configuration command mode.
no lldp med-network-policies command
The
no lldp med-network-policies
command disables LLDP MED policies for switch
ports. The syntax for the
no lldp med-network-policies
command is
no lldp med-network-policies [port <portList>] {voice|voice-
signaling}
Run the
no lldp med-network-policies
command in Interface Configuration command
mode.
The following table describes the variables for the
no lldp med-network-policies
command.
System configuration using ACLI
174 Configuration — System April 2011