Avaya 4524GT, Configuration Manual

Page: 103 / 362

Run the
no ip bootp server
command in Global Configuration command mode.
default ip bootp server command
The default
ip bootp server
command uses BootP when needed.
The syntax for the
default ip bootp server
command is:
default ip bootp server
Run the
default ip bootp server
command in Global Configuration command mode.
Customizing ACLI banner
You can configure the banner that is presented when a user logs in to the switch through ACLI
to a user-defined value. The banner cannot exceed 1539 bytes, or 19 rows by 80 columns plus
line termination characters.
The banner control setting is saved to NVRAM, and both the banner file and control setting
are distributed to all units within a stack.
To customize ACLI banner using ACLI, see the following commands:
• show banner command on page 103
• banner command on page 104
• no banner command on page 104
show banner command
The
show banner
command displays the banner.
The syntax for the
show banner
command is:
show banner [static | custom]
Run the
show banner
command in Privileged EXEC command mode.
The following table describes the parameters for the
show banner
command.
Table 37: show banner parameters
Parameters and
variables
Description
static | custom Specify which banner is currently set to be displayed:
Customizing ACLI banner
Configuration — System April 2011 103