Avaya 4524GT, Configuration Manual

Page: 184 / 362

show lldp vendor-specific avaya call-server
Job aid: show lldp vendor-specific call-server command output
The following figure displays sample output for the
show lldp vendor-specific avaya
call-server
command.
Viewing Avaya IP phone call server IP address TLV information
using ACLI
Use this procedure to display call server IP address information received on switch ports from
an Avaya IP phone.
Prerequisites
Log on to the Privileged EXEC mode in ACLI.
Procedure steps
Display call server TLV configuration information received on specific switch ports from
connected Avaya IP phones by using the following command:
show lldp [port <portlist>] neighbor vendor-specific avaya
call-server
Variable definitions
Variable Value
<portlist> Specifies a port or list of ports.
Configuring the switch file server IP address TLV using ACLI
Use this procedure to define the local file server IP addresses that switch ports advertise to
Avaya IP phones.
You can define IP addresses for a maximum of 4 local file servers.
Note:
If your Avaya IP Handset uses SIP, 802.1AB (LLDP) TLVs do not provide all information for
the IP Phone. You must specify a file server IP address TLV so the IP phone can download
System configuration using ACLI
184 Configuration — System April 2011