AutomationDirect DL105, User Manual

Page: 41 / 350

Installation,
Wiring,
and
Specifications
2--10
Installation, Wiring, and Specifications
DL105 PLC User Manual, 3rd Edition
DL105 Micro PLCs can also be secured to a cabinet by using mounting rails. We
recommend rails that conform to DIN EN standard 50 022. They are approximately
35mm high, with a depth of 7.5mm. If you mount the Micro PLC on a rail, do consider
using end brackets on each side of the PLC. The end bracket helps keep the PLC
from sliding horizontally along the rail, reducing the possibility of accidentally pulling
the wiring loose. These items can be ordered from AutomationDirect.com
website, or from our catalog.
On the bottom of the PLC is a small retaining clip. To secure the PLC to a DIN rail,
place it onto the rail and gently push up on the clip to lock it onto the rail.
To remove the PLC, pull down on the retaining clip, lift up on the PLC slightly, then
pulling it away from the rail.
35 mm
7mm
Retaining Clip
DIN Rail Dimensions
DIN Rail slot.
Use 35mm x 7mm rail con-
forming to DIN EN 50022.
Using Mounting
Rails