Appendix
D
Special
R
elays
D--3
Special Relays
DL105 PLC User Manual, 3rd Edition
SP60
Value less than
on when the accumulator value is less than the instruction value.
SP61
Value equal to
on when the accumulator value is equal to the instruction value.
SP62
Greater than
on when the accumulator value is greater than the instruction value.
SP63
Zero
on when the result of the instruction is zero (in the accumulator.)
SP64
Half borrow
on when the 16 bit subtraction instruction results in a borrow.
SP65
Borrow
on when the 32 bit subtraction instruction results in a borrow.
SP66
Half carry
on when the 16 bit addition instruction results in a carry.
SP67
Carry
when the 32 bit addition instruction results in a carry.
SP70
Sign
on anytime the value in the accumulator is negative.
SP71
Invalid octal
number
on when an Invalid octal number was entered. This also occurs when
the V-memory specified by a pointer (P) is not valid.
SP73
Overflow
on if overflow occurs in the accumulator when a signed addition or
subtraction results in an incorrect sign bit.
SP75
Data error
on if a BCD number is expected and a non--BCD number is
encountered.
SP76
Load zero
on when any instruction loads a value of zero into the accumulator.
SP100
X0 is on
X0 — on for 1 scan after a pulse on X0 occurs.
SP540
Current = target value
on when the counter current value equals the value in V2320.
SP541
Current = target value
on when the counter current value equals the value in V2322.
SP542
Current = target value
on when the counter current value equals the value in V2324.
SP543
Current = target value
on when the counter current value equals the value in V2326.
SP544
Current = target value
on when the counter current value equals the value in V2330.
SP545
Current = target value
on when the counter current value equals the value in V2332.
SP546
Current = target value
on when the counter current value equals the value in V2334.
SP547
Current = target value
on when the counter current value equals the value in V2336.
SP550
Current = target value
on when the counter current value equals the value in V2340.
SP551
Current = target value
on when the counter current value equals the value in V2342.
SP552
Current = target value
on when the counter current value equals the value in V2344.
SP553
Current = target value
on when the counter current value equals the value in V2346
SP554
Current = target value
on when the counter current value equals the value in V2350.
SP555
Current = target value
on when the counter current value equals the value in V2352.
SP556
Current = target value
on when the counter current value equals the value in V2354.
SP557
Current = target value
on when the counter current value equals the value in V2356.
SP560
Current = target value
on when the counter current value equals the value in V2360.
SP561
Current = target value
on when the counter current value equals the value in V2362.
SP562
Current = target value
on when the counter current value equals the value in V2364.
SP563
Current = target value
on when the counter current value equals the value in V2366.
SP564
Current = target value
on when the counter current value equals the value in V2370.
SP565
Current = target value
on when the counter current value equals the value in V2372.
SP566
Current = target value
on when the counter current value equals the value in V2374.
SP567
Current = target value
on when the counter current value equals the value in V2376.
Accumulator
Status
HSIO Pulse
Catch Relay
Equal Relays for
HSIO Mode 10
Counter Presets
Summary of Contents for DL105
