AutomationDirect DL105, User Manual

Page: 61 / 350

Installation,
Wiring,
and
Specifications
2--30
Installation, Wiring, and Specifications
DL105 PLC User Manual, 3rd Edition
The F1--130AR has a +24V supply output to power external devices. The output is
rated at 0.5 Amperes, and includes short-circuit protection and full isolation from
internal CPU circuitry. These features make it ideal for powering sensors, solenoids,
and other field devices. In fact, it can be used as the DC supply for loads in the relay
output circuits. Be sure the combined load currents do not exceed 0.5 A. Note that on
the F1--130AR, the +24V auxiliary output is not high enough to power its input
circuits (input ON threshold is 90VDC).
External Power Requirements 100 -- 240 +10% --15%
Communication Port K--Sequence, 9600 baud, 8 data bits, odd parity
Programming cable type D2--DSCBL
Internal Field Supply Ratings +24VDC , 0.5A maximum, isolated
Operating Temperature 32 to 140

F (0 to 60
_
C)
Storage Temperature --4 to 158

F (--20 to 70
_
C)
Relative Humidity 5 to 95% (non-condensing)
Environmental air No corrosive gases permitted
Vibration MIL STD 810C 514.2
Shock MIL STD 810C 516.2
Noise Immunity NEMA ICS3--304
Terminal Type Removable
Wire Gauge One AWG14 or two AWG16, AWG24 minimum
Input Voltage Range for ON condition 80 -- 132 VAC, or 90 -- 150 VDC
Input Current 6 mA @ 132 VAC
6.8 mA @ 150 VDC
Maximum Voltage 132 VAC, or 150 VDC
ON Current/Voltage >4 mA @ 80 VAC, or 90 VDC
OFF Current/Voltage <2 mA @ 45 VAC, or 60 VDC
OFF to ON Response < 8 mS
ON to OFF Response <15 mS
Status Indicators Logic Side
Commons 4 channels / common x 2 banks,
2 channels / common x 1 bank
Operating Voltage 12 -- 250 VAC, 12 -- 30 VDC @ 7A,
30 -- 150 VDC @ 0.5A, resistive
Output Current 7A / point (subject to derating)
14A / common
Maximum Motor Load 1/3 HP
Maximum Voltage 265 VAC, 150 VDC
Minimum Off Resistance 100 meg ohms @ 500 VDC
Smallest Recommended Load 10 mA
OFF to ON Response 15 mS
ON to OFF Response 5 mS
Status Indicators Logic Side
Commons 2 channels / common x 4 banks
Fuses None (external recommended)
Aux24V
Power Supply
F1--130AR
General
Specifications
AC Input
Specifications
X0 -- X7, X10 -- X11
Relay Output
Specifications
Y0 -- Y7