AutomationDirect DL105, User Manual

Page: 331 / 350

EU
Directives
Appendix
F
F--3
European Union Directives
DL105 PLC User Manual, 3rd Edition
The end user of the products must comply with any Directives that may cover
maintenance, disposal, etc. of equipment or various components. Although we
strive to provide the best assistance available, it is impossible for us to test all
possible configurations of our products with respect to any specific Directive.
Because of this, it is ultimately your responsibility to ensure that your machinery (as
a whole) complies with these Directives and to keep up with applicable Directives
and/or practices that are required for compliance.
As of August 1, 2002, the DL105 (F1--130DR--CE, F1--130DD--CE, F1--130DR--D,
and F1--130DD--D versions only), DL05, DL06, DL205, DL305, and DL405 PLC
systems manufactured by Koyo Electronics Industries, FACTS Engineering or
HOST Engineering when properly installed and used, conform to the
Electromagnetic Compatibility (EMC), Low Voltage Directive, and Machinery
Directive requirements of the following standards.
S
EMC Directive Standards Relevent to PLCs
EN50081--1 Generic emission standard for residential, commercial
and light industry.
EN50081--2 Generic emission standard for industrial environment.
EN50082--1 Generic immunity standard for residential, commercial
and light industry.
EN50082--2 Generic immunity standard for industrial environment.
S
Low Voltage Directive Standard Applicable to PLCs
EN61010--1 Safety requirements for electrical equipment for
measurement, control and laboratory use.
S
Product Specific Standard for PLCs
EN61131--2 Programmable controllers, equipment requirements and
tests. This standard replaces the above generic standards for immunity
and safety. However, the generic emissions standards must still be used
in conjuction with the following standards:
--EN61000--3--2 Harmonics
--EN61000--3--2 Fluctuations
S
Warning on Electrostatic Discharge (ESD)
We recommend that all personnel take necessary precautions to avoid
the risk of transferring static charges to inside the control cabinet, and
clear warnings and instructions should be provided on the cabinet
exterior. Such precautions may include, the use of earth straps, similar
devices or the powering off of the equipment inside the enclosure before
the door is opened.
S
Warning on Radio Interference (RFI)
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
S
External switches, circuit breaker or external fusing, are required for
these devices.
S
The switch or circuit breaker should be mounted near the PLC
equipment.
AutomationDirect is currently in the process of changing their testing procedures
form the generic standards to the product specific standards.
General Safety