67
4. A series of instruction screens display for users to perform the particle
filter regeneration step by step. Follow the onscreen instructions and
tap
OK
button until the tool displays the regeneration status as below.
5. When the particle filter regeneration is complete, confirm to exit the
display. Tap
Repeat
to recheck the status again or tap
End
to exit.
Figure 5-28
Sample Repeat Screen
NOTE
In the case of a particle filter heavily loaded with soot, it can occur that the
regeneration request is blocked again after a short time or is not released.
Drive the vehicle for approximately 30 minutes at a constant speed. Then
perform the Particle filter regeneration service again.
Figure 5-27
Sample Regeneration Status Screen
