84
The sensor IDs retrieved from sensor activation and TPMS ECU will
automatically appear on the left column of the table on the screen with the
trigger and OBD marks before them.
If the OBD function is not supported by the test vehicle and the sensor ID
saved in the ECU cannot be retrieved, the Programming screen appears as
below.
In this example, the OBD function is not supported by the test vehicle and
therefore the
Copy by OBD
function will not display.
Copy by Activation
Once the sensors mounted on the vehicle have been triggered and the
sensor information displayed on the tool, the
Copy by Activation
can use
to program a new MX-Sensor.
Select a wheel location on the tablet and place a MX-Sensor near the TPMS
antenna of the tablet (the top right corner). Tap
Copy by Activation
to
program a new MX-Sensor.
Figure 6-17
Sample Programming Screen 2
