87
Select one sensor position and place a MX-Sensor near the TPMS antenna
of the tablet (the top right corner), and then tap
Copy by OBD
to program
the new MX-Sensor.
When the programming is complete, the programmed ID will display in the
column to the right of the wheel designation. In the pictured example, the
new ID is displayed to the right of the FR column.
By using
Copy by OBD
, the sensor ID that is retrieved from TPMS ECU is
programmed to the new MX-Sensor.
There is no need to perform the
Relearn
function to write the ID into the
ECU when the new programmed sensor has been put in the same position.
The
Copy by OBD
programming method, if available, is recommended to
program new MX-Sensors as there is no need for Relearn.
Copy by Input
The
Copy by Input
allows users to program a new MX-Sensor with the ID
of an original TPMS sensor.
Figure 6-21
Sample Copy by OBD Screen
