60
1) Tap
Steering Angle Sensor Calibration
from the
SAS function menu
to enter the function screen.
2) Follow the on-screen instructions to set the ignition on/off as guided.
The vehicle battery voltage signal should be in the range 12.5
– 13.5
volts to proceed with this service, otherwise the scan tablet will display
a warning message.
3) Ensure the steering wheel is in the central position and the front wheels
are in the straight position. Then tap
OK
to proceed.
4) When the operation is completed, the scan tool will display a
confirmation message. An error message will display if the procedure
cannot be completed. Exit the diagnosis program, and solve the error
before attempting SAS calibration again.
Figure 5-19
Sample SAS Function Screen 1
Figure 5-20
Sample SAS Function Screen 2
