47
NOTE
All required work must be carried out before the service indicators are reset.
Failure to do so may result in incorrect service values and cause DTCs to be
stored by the relevant control module.
NOTE
For some vehicles, the scan tool can reset additional service lights such as
maintenance cycle and service interval. On BMW vehicles for an example,
service resets include engine oil, spark plugs, front/rear brakes, coolant,
particle filter, brake fluid, micro filter, vehicle inspection, exhaust emission
inspection and vehicle check.
All software screens shown in this manual are examples, actual test
screens may vary for each vehicle being tested. Observe the menu
headings and on-screen instructions to make correct selections.
To perform oil reset functions
1. Tap the
Service
application button from the MaxiCOM Job Menu.
2. Tap
Oil Reset
button. The vehicle manufacturer screen displays.
Tap
VIN Scan
or the vehicle make to acquire vehicle VIN
information and tap
Yes
on
page 20 for detail.
3. Tap the desired function in the Oil Reset function list. The list may
vary by test vehicle.
Figure 5-1
Sample Oil Reset Function List
