AudioCodes Media Pack MP-11x, User Manual

Page: 524 / 650

User's Manual 524 Document #: LTRT-65432
MP-11x & MP-124
Parameter Description
EMS: Proxy IP
[ProxyIP]
Set IDs, each with up to five Proxy server IP addresses (or fully
qualified domain name/FQDN). Each Proxy Set can be defined
with a transport type (UDP, TCP, or TLS). The format of this
parameter is as follows:
[ProxyIP]
FORMAT ProxyIp_Index = ProxyIp_IpAddress,
ProxyIp_TransportType, ProxyIp_ProxySetId;
[\ProxyIP]
For example:
ProxyIp 0 = 10.33.37.77, -1, 0;
ProxyIp 1 = 10.8.8.10, 0, 2;
ProxyIp 2 = 10.5.6.7, -1, 1;
Notes:

To assign various attributes (such as Proxy Load Balancing)
per Proxy Set ID, use the parameter ProxySet.

For a description of this table, see 'Configuring Proxy Sets
Table' on page
208 .
Proxy Set Table
Web: Proxy Set Table
EMS: Proxy Set
[ProxySet]
This table parameter configures the Proxy Set ID table. It is
used in conjunction with the ProxyIP table ini file parameter,
which defines the IP addresses per Proxy Set ID.
The ProxySet table ini file parameter defines additional
attributes per Proxy Set ID. This includes, for example, Proxy
keep-alive and load balancing and redundancy mechanisms (if
a Proxy Set contains more than one proxy address).
The format of this parameter is as follows:
[ProxySet]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime,
ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap, ProxySet_SRD,
ProxySet_ClassificationInput,
ProxySet_ProxyRedundancyMode;
[\ProxySet]
For example:
ProxySet 0 = 0, 60, 0, 0, 0, , 1;
ProxySet 1 = 1, 60, 1, 0, 1, , 0;
Notes:

For configuring the Proxy Set IDs and their IP addresses,
use the parameter ProxyIP.

For a description of this table, see 'Configuring Proxy Sets
Table' on page
208 .
Registrar Parameters
Web: Enable Registration
EMS: Is Register Needed
[IsRegisterNeeded]
Enables the device to register to a Proxy/Registrar server.

[0] Disable = (Default) The device doesn't register to
Proxy/Registrar server.

[1] Enable = The device registers to Proxy/Registrar server
when the device is powered up and at every user-defined
interval (configured by the parameter RegistrationTime).
Note: The device sends a REGISTER request for each
channel or for the entire device (according to the