AudioCodes Media Pack MP-11x, User Manual

Page: 258 / 650

User's Manual 258 Document #: LTRT-65432
MP-11x & MP-124
The table below shows configuration examples of Tel-to-IP routing rules, where:

Rule 1 and 2 (Least Cost Routing rule): For both rules, the called (destination)
phone number prefix is 10, the caller's (source) phone number prefix is 100, and the
call is assigned IP Profile ID 1. However, Rule 1 is assigned a cheaper Cost Group
than Rule 2, and therefore, the call is sent to the destination IP address (10.33.45.63)
associated with Rule 1.

Rule 3 (IP Group destination rule): For all callers (*), if the called phone number
prefix is 20, the call is sent to IP Group 1 (whose destination is the IP address
configured for its associated Proxy Set ID).

Rule 4 (domain name destination rule): If the called phone number prefix is 5, 7, 8,
or 9 and the caller belongs to Hunt Group ID 1, the call is sent to domain.com.

Rule 5 (block rule): For all callers (*), if the called phone number prefix is 00, the call
is rejected (discarded).

Rule 6, Rule 7, and Rule 8 (Forking Group rule): For all callers (*), if the called
phone number prefix is 100, the call is sent to Rule 7 and 9 (belonging to Forking
Group "1"). If their destinations are unavailable and alternative routing is enabled, the
call is sent to Rule 8 (Forking Group "2").