AudioCodes Media Pack MP-11x, User Manual

Page: 48 / 650

User's Manual 48 Document #: LTRT-65432
MP-11x & MP-124

To save configuration changes on a page to the device's volatile memory (RAM),
do one of the following:

On the toolbar, click the Submit button.

At the bottom of the page, click the Submit button.
When you click Submit , modifications to parameters with on-the-fly capabilities are
immediately applied to the device and take effect. Parameters displayed on the page with
the lightning
symbol take effect only after a device reset. For resetting the device, see
'Resetting the Device' on page 363 .
Note: Parameters saved to the volatile memory (by clicking Submit ), revert to their
previous settings after a hardware or software reset, or if the device is powered down.
Therefore, to ensure parameter changes (whether on-the-fly or not) are retained,
save ('burn') them to the device's non-volatile memory, i.e., flash (see 'Saving
Configuration' on page
366 ).
If you enter an invalid parameter value (e.g., not in the range of permitted values) and then
click
Submit , a message box appears notifying you of the invalid value. In addition, the
parameter value reverts to its previous value and is highlighted in red, as shown in the
figure below:
Figure 4-10: Value Reverts to Previous Valid Value
4.1.6.4 Working with Tables
This section describes how to work with configuration tables, which are provided in basic or
enhanced design, depending on the configuration page.