AudioCodes Media Pack MP-11x, User Manual

Page: 641 / 650

Version 6.6 641 MP-11x & MP-124
User's Manual 44. Configuration Parameters Reference
Parameter Description
[IP2IPRouting] This table parameter configures the IP-to-IP Routing table for
SAS routing rules. The format of this parameter is as follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions;
[\IP2IPRouting]
For example:
IP2IPRouting 1 = -1, *, *, *, *, 0, -1, -1, , 0, -1, 0;
Note: For a detailed description of this table parameter, see
'SAS Routing Based on IP-to-IP Routing Table' on page 349 .
44.14 Auxiliary and Configuration File Name Parameters
The configuration files (i.e., auxiliary files) can be loaded to the device using the Web
interface or a TFTP session. For loading these files using the ini file, you need to configure
these files in the ini file and configured whether they must be stored in the non-volatile
memory. The table below lists the ini file parameters associated with these auxiliary files.
For more information on the auxiliary files, see 'Loading Auxiliary Files' on page 369 .
Table 44-65: Auxiliary and Configuration File Parameters
Parameter Description
General Parameters
[SetDefaultOnIniFileProcess] Determines if all the device's parameters are set to their defaults
before processing the updated ini file.

[0] = Disable - parameters not included in the downloaded ini file
are not returned to default settings (i.e., retain their current
settings).

[1] = Enable (default).
Note: This parameter is applicable only for automatic HTTP update
or Web ini file upload (not applicable if the ini file is loaded using
BootP).
[SaveConfiguration] Determines if the device's configuration (parameters and files) is
saved to flash (non-volatile memory).

[0] = Configuration isn't saved to flash memory.

[1] = (Default) Configuration is saved to flash memory.
Auxiliary and Configuration File Name Parameters
Web/EMS: Call Progress Tones
File
[CallProgressTonesFilename]
Defines the name of the file containing the Call Progress Tones
definitions. For more information on how to create and load this file,
refer to
DConvert Utility User's Guide .
Note: For this parameter to take effect, a device reset is required.
Web/EMS: Prerecorded Tones Defines the name (and path) of the file containing the Prerecorded