AudioCodes Media Pack MP-11x, User Manual

Page: 192 / 650

User's Manual 192 Document #: LTRT-65432
MP-11x & MP-124
Parameter Description
Profile
[QOERules_Profile]
Defines the pre-configured threshold profile to use.

[0] No Profile = No profile is used and you need to define the
thresholds in the parameters described below.

[1] Low Sensitivity = Automatically sets the thresholds to low
sensitivity values. Therefore, reporting is done only if changes in
parameters' values is significant.

[2] Default Sensitivity = Automatically sets the thresholds to a
medium sensitivity.

[3] High Sensitivity = Automatically sets the thresholds to high
sensitivity values. Therefore, reporting is done for small
fluctuations in parameters' values.
Green Yellow Threshold
[QOERules_GreenYellowThre
shold]
Defines the parameter threshold values between green (good
quality) and yellow (medium quality) states.
Green Yellow Hysteresis
[QOERules_GreenYellowHyst
ersis]
Defines the hysteresis (fluctuation) for the green-yellow threshold.
When the threshold is exceeded by this hysteresis value, the
device sends a report to the SEM indicating this change.
Yellow Red Threshold
[QOERules_YellowRedThresh
old]
Defines the parameter threshold values between yellow (medium
quality) and red (poor quality). When this threshold is exceeded,
the device sends a report to the SEM indicating this change.
Yellow Red Hysteresis
[QOERules_YellowRedHyster
sis]
Defines the hysteresis (fluctuation) for the yellow-red threshold.
When the threshold is exceeded by this hystersis value, the device
sends a report to the SEM indicating this change.
Green Yellow Operation
[QOERules_GreenYellowOper
ation]
Defines the action that is done if the green-yellow threshold is
crossed.

[1] Notify = (Default) Device sends a report to the SEM server.

[2] Change Redundancy Depth= RTP redundancy packets are
sent to the relevant call leg.
Note: This field is applicable only if the monitored parameter is
remote packet loss.
Green Yellow Operation Details
[QOERules_GreenYellowOper
ationDetails]
Note: This field is currently not supported.
Defines the desired RTP redundancy depth. The actual
redundancy depth on the relevant call leg is the minimum between
the desired depth and the maximum supported depth on that call
leg.
Note: This field is applicable only if the 'Green Yellow Operation'
field is set to Change Redundancy Depth.
Yellow Red Operation
[QOERules_YellowRedOperat
ion]
Note: This field is currently not supported.
Defines the action that is done if the yellow-red threshold is
crossed.

[1] Notify = (Default) Device sends a report to the SEM server.

[2] Change Redundancy Depth = RTP redundancy packets are
sent to the relevant call leg.

Note: This field is applicable only if the monitored parameter is
remote packet loss.