AudioCodes Media Pack MP-11x, User Manual

Page: 313 / 650

Version 6.6 313 MP-11x & MP-124
User's Manual 26. Analog Gateway
2. Click the Add button; the following dialog box appears:
Figure 26-10: Tone Index Table Page
The figure above shows a configuration example for using distinctive ringing and call
waiting tones of Index #9 ('Priority Index' 1) in the CPT file for FXS endpoints 1 to 4
when a call is received from a source number with prefix 2.
3. Configure the table as required. For a description of the parameters, see the table
below.
4. Click Submit to apply your changes.
Table 26-8: Tone index Table Parameter Description
Parameter Description
Index Defines the table index entry. Up to 50 entries can be defined.
FXS Port First
[ToneIndex_FXSPort_First]
Defines the first port in the FXS port range.
FXS Port Last
[ToneIndex_FXSPort_Last]
Defines the last port in the FXS port range.
Source Prefix
[ToneIndex_SourcePrefix]
Defines the prefix of the calling number.
Destination Prefix
[ToneIndex_DestinationPrefix]
Defines the prefix of the called number.
Priority Index
[ToneIndex_PriorityIndex]
Defines the index of the distinctive ringing and call waiting tones.
The call waiting tone index equals to the Priority Index plus the
value of the FirstCallWaitingToneID parameter. For example, if you
want to use the call waiting tone in the CPT file at Index #9, you
need to enter "1" as the Priority Index value and set the
FirstCallWaitingToneID parameter to "8". The summation of these
values is 9, i.e., index #9.
The default is 0.