AudioCodes Media Pack MP-11x, User Manual

Page: 58 / 650

User's Manual 58 Document #: LTRT-65432
MP-11x & MP-124
4. Click the Send File button.
Notes:
•
You can only load a Scenario file to a device that has the same hardware
configuration as the device on which it was created.
•
The loaded Scenario replaces any existing Scenario.
•
You can also load a Scenario file using BootP, by loading an ini file that contains
the ini file parameter ScenarioFileName (see Web and Telnet Parameters on page
486 ). The Scenario file must be located in the same folder as the ini file. For
information on using AudioCodes AcBootP utility, refer to AcBootP Utility User's
Guide.
4.1.8.6 Deleting a Scenario
You can delete the Scenario, as described in the procedure below.

To delete the Scenario:
1. On the Navigation bar, click the Scenarios tab; a message box appears, requesting
you to confirm:
2. Click OK ; the Scenario mode appears in the Navigation tree.
3. Click the Delete Scenario File button; a message box appears requesting
confirmation for deletion.
Figure 4-20: Message Box for Confirming Scenario Deletion