AudioCodes Media Pack MP-11x, User Manual

Page: 347 / 650

Version 6.6 347 MP-11x & MP-124
User's Manual 28. SAS Configuration

To manipulate the destination number in SAS emergency state:
1. Open the SAS Configuration page ( Configuration tab > VoIP menu > SAS > Stand
Alone Survivability ).
2. From the 'SAS Inbound Manipulation Mode' ( SASInboundManipulationMode ) drop-
down list, select Emergency Only .
3. Click Submit ; the SAS Inbound Manipulation Mode Table button appears on
the page.
4. Click this button to open the IP to IP Inbound Manipulation page.
5. Add your SAS manipulation rule as required. See the table below for descriptions of
the parameters.
6. Click Submit to save your changes.
Notes:
•
The following fields in the IP to IP Inbound Manipulation table are not applicable to
SAS and must be left at their default values:
- 'Additional Manipulation' - default is
0
- 'Manipulation Purpose' - default is Normal
- 'Source IP Group' - default is -1
•
The IP to IP Inbound Manipulation table can also be configured using the table ini
file parameter, IPInboundManipulation.
Table 28-1: SAS IP to IP Inbound Manipulation Parameters
Parameter Description
Matching Characteristics (Rule)
Additional Manipulation
[IPInboundManipulation_IsAd
ditionalManipulation]
Determines whether additional SIP URI user part manipulation is
done for the table entry rule listed directly above it.

[0] No = (Default) Regular manipulation rule (not done in
addition to the rule above it).

[1] Yes = If the above row entry rule matched the call, consider
this row entry as a match as well and perform the manipulation
specified by this rule.
Note: Additional manipulation can only be done on a different SIP
URI, source or destination, to the rule configured in the row above
as configured by the 'Manipulated URI' parameter (see below).
Manipulation Purpose
[IPInboundManipulation_Mani
pulationPurpose]
Defines the purpose of the manipulation:

[0] Normal = (Default) Inbound manipulations affect the routing
input and source and/or destination number.

[1] Routing input only = Inbound manipulations affect the routing
input only, retaining the original source and destination number.
Source IP Group ID
[IPInboundManipulation_SrcI
pGroup]
Defines the IP Group from where the incoming INVITE is received.
For any IP Group, enter the value "-1".