AudioCodes Media Pack MP-11x, User Manual

Page: 54 / 650

User's Manual 54 Document #: LTRT-65432
MP-11x & MP-124
10. Click OK ; the Scenario mode is quit and the menu tree of the Configuration tab
appears in the Navigation tree.
Figure 4-17: Creating a Scenario
Table 4-7: Scenario Description
Description
1
Selected page item in the Navigation tree whose page contains the parameter that you
want to add to the Scenario Step.
2 Name of a Step that has been added to the Scenario.
3 'Scenario Name' field for defining a name for the Scenario.
4 'Step Name' field for defining a name for a Scenario Step.
5 Save & Finish button to save your Scenario.
6 Selected parameter(s) that you want added to a Scenario Step.
7
Next button to add the current Step to the Scenario and enables you to add additional
Steps.
Notes:
•
You can add up to 20 Steps per Scenario, where each Step can contain up to 25
parameters.
•
When in Scenario mode, the Navigation tree is in 'Full' display (i.e., all menus are
displayed in the Navigation tree) and the configuration pages are in 'Advanced
Parameter List' display (i.e., all parameters are shown in the pages). This ensures
accessibility to all parameters when creating a Scenario. For a description on the
Navigation tree views, see 'Navigation Tree' on page
43 .
•
If you previously created a Scenario and you click the Create Scenario button, the
previously created Scenario is deleted and replaced with the one you are creating.
•
Only Security Administrator Web users can create Scenarios.