AudioCodes Media Pack MP-11x, User Manual

Page: 595 / 650

Version 6.6 595 MP-11x & MP-124
User's Manual 44. Configuration Parameters Reference
Parameter Description
server sets the Contact header of the 200 OK response to
the actual unique identifier (Conference URI) to be used by
the participants. The Conference URI is included in the URI
of the REFER with a Replaces header sent by the device to
the Conferencing server. The Conferencing server then
sends an INVITE with a Replaces header to the remote
participants.
Notes:

This parameter is applicable only to FXS interfaces.

When using an external conference server (options [0] or
[1]), a conference call with up to six participants can be
established.

For local, on-board three-way conferencing (option [2]) on
MP-112, the following additional parameter settings must be
made:
EnableIPMediaChannels = 1
[ IPMediaChannels ]
FORMAT IPMediaChannels_Index =
IPMediaChannels_ModuleID,
IPMediaChannels_DSPChannelsReserved;
IPMediaChannels 0 = 1, 2;
[ \IPMediaChannels ]
Web: Max 3 Way Conference
EMS: Max In Board Calls
[MaxInBoardConferenceCalls]
Defines the maximum number of simultaneous, on-board
three-way conference calls.
The valid range is 0 to 2. The default is 2.
Notes:

For enabling on-board, three-way conferencing, use the
3WayConferenceMode parameter.

This parameter is applicable only to FXS interfaces.
Web: Three Way Conference Non
Allocatable Ports
EMS: Non Allocateable Port
Number
[3WayConfNoneAllocateablePort
s]
Defines the ports that are not allocated as resources for on-
board three-way conference calls that are initiated by other
ports. Ports that are not configured with this parameter (and
that are idle) are used by the device as a resource for
establishing these type of conference calls.
The valid range is up to 8 ports. To add a range of ports, use
the comma separator. For example, for not allowing the use of
ports 2, 4 and 8 as resources, enter the following value: 2,4,8.
The order of the entered values is not relevant (i.e., the
example above can be entered as 8,2,4). The default is 0.
Notes:

To enable on-board, three-way conferencing, use the
3WayConferenceMode and MaxInBoardConferenceCalls
parameters.

This parameter is applicable only to FXS interfaces.
Web: Establish Conference Code
EMS: Establish Code
[ConferenceCode]
Defines the DTMF digit pattern, which upon detection
generates the conference call when three-way conferencing is
enabled (Enable3WayConference is set to 1).
The valid range is a 25-character string. The default is “!”
(Hook-Flash).
Note: If the FlashKeysSequenceStyle parameter is set to 1 or
2, the setting of the ConferenceCode parameter is overridden.