User's Manual
366
Document #: LTRT-65432
MP-11x & MP-124
To unlock the device:
1.
Open the Maintenance Actions page (see 'Maintenance Actions' on page
2.
Under the 'LOCK / UNLOCK' group, click the
UNLOCK
button. Unlock starts
immediately and the device accepts new incoming calls.
Note:
The Home page's General Information pane displays whether the device is
locked or unlocked (see 'Viewing the Home Page' on page
30.4 Saving Configuration
The Maintenance Actions page allows you to save (
burn
) the current parameter
configuration (including loaded auxiliary files) to the device's
non-volatile
memory (i.e.,
flash). The parameter modifications that you make throughout the Web interface's pages
are temporarily saved (to the
volatile
memory - RAM) when you click the
Submit
button on
these pages. Parameter settings that are saved only to the device's RAM revert to their
previous settings after a hardware/software reset (or power failure). Therefore, to ensure
that your configuration changes are retained, you must save them to the device's flash
memory using the burn option described below.
To save the changes to the non-volatile flash memory :
1.
Open the Maintenance Actions page (see 'Basic Maintenance' on page
2.
Under the 'Save Configuration' group, click the
BURN
button; a confirmation message
appears when the configuration successfully saves.
Notes:
•
Saving configuration to the
non-volatile
memory may disrupt current traffic on the
device. To avoid this, disable all new traffic before saving, by performing a
graceful lock (see 'Locking and Unlocking the Device' on page
•
Throughout the Web interface, parameters displayed with the lightning
symbol
are not applied on-the-fly and require that you reset the device for them to take
effect (see 'Resetting the Device' on page
•
The Home page's General Information pane displays whether the device is
currently "burning" the configuration (see 'Viewing the Home Page' on page
Summary of Contents for Media Pack MP-11x
