ATTO Technology FibreBridge 2200D, Software Manual

Page: 26 / 66

ATTO Technology, Inc. ATTO FibreBridge Software Manual
- -
21
ATTO Technology, Inc.
Chapter 4:
Menu Interface for ATTO FibreBridge 2200 R/D, 3100R and 3200R
Menu Interface
This section describes the Menu Interface method of accessing ATTO FibreBridge services. The ATTO
FibreBridge service options are accessible using a Command Line Interface (CLI). The CLI is designed
for advanced programmers and integrators. To see a list of available commands type 'help' at the Ready
prompt.
The menu interface provides a user-friendly way of configuring and managing the ATTO FibreBridge
product module and may be invoked at the CLI Ready prompt by typing 'menu'. CLI commands may NOT
be entered while the menu interface is enabled. Typing 'menu' at any menu prompt will return the user
back to the command-line interface. Any parameter modification prompts may be cancelled by pressing
'Enter' at the prompt without typing a value. Confirmation prompts must be answered with 'y' or 'n'.
To access menu options type the letter of the option as it appears on the display followed by a carriage
return or Enter. To return to a previous menu, type 'x' then carriage return or Enter. Note:
The ATTO
FibreBridge Services Menu Interface is not case sensitive. (Use of upper or lower case letters is
permitted).
Main Menu
This is the starting point for the Menu Interface. All other menus are descendents of this menu.
FibreBridge Main Menu Notes
A FibreBridge Configuration… Provides option for configuring the
unit
B FibreBridge Maintenance… Provides options for performing
maintenance on the unit
C FibreBridge Diagnostics… Provides options to view or clear
the current error log
D Save / Restore Configuration… Restores the manufacturer’s
default settings
X Exit Menu Mode Exit the menu and return to the CLI
ATTO FibreBridge Configuration Menu
FibreBridge Configuration Menu Notes
A FibreBridge Name Prompt for FibreBridge name
B Fibre Channel Configuration… Provides options for configuring
the Fibre Channel interface
C SCSI Port 1 Configuration… Provides options for configuring
SCSI port 1
D SCSI Port 2 Configuration… Provides options for configuring
SCSI port 2
E Serial (RS-232) Port Configuration… Provides options for reconfiguring
the RS-232 interface
F Network Configuration… Provides options for configuring
the IP address and parameters
X Return to previous menu… Return to the Main Menu