ATTO Technology FibreBridge 2200D, Software Manual

Page: 11 / 66

ATTO Technology, Inc. ATTO FibreBridge Software Manual
- -
6
ATTO Technology, Inc.
ATTO FibreBridge Configuration Service Commands
FcAck0 (ATTO FibreBridge 2200R/D & 3200R)
Sy
ntax: set FcAck0 [enabled | disabled]
get FcAck0
Returns:
(
terse) [enabled | disabled]
( verbose) FcAck0 = [enabled | disabled]
Specifies whether ACK0 or ACK1 will be returned in response to a Class 2 FC data frame or
Sequence. Enable this option to send ACK0 at the end of a Sequence. Disable this option to
return an ACK1 frame for each data frame.
FcAddressTranslation
Syntax: set FcAddressTranslation [enabled | disabled]
get FcAddressTranslation
Returns:
(terse)
[enabled | disabled]
(verbose) FcAddressTranslation = [enabled | disabled]
Specifies whether LUNs received from the host are translated according to the appropriate
PDAM, LUAM, or VDAM translation rules.
FcAddressLUAM
Syntax: set FcAddressLUAM [bb ll tt]
get FcAddressLUAM
Returns:
(terse)
bb ll tt
(verbose) FcAddressLUAM = bb ll tt
Specifies the translation rules applied to Fibre Channel LUNs in the Logical Unit Address Method
format.
FcAddressPDAM
Syntax: set FcAddressPDAM [bb ll tt]
get FcAddressPDAM
Returns:
(terse)
bb ll tt
(verbose) FCAddressPDAM = bb ll tt
Specifies the translation rules applied to Fibre Channel LUNs in the Physical Device Address
Method format.
FcAddressVDAM
Syntax: set FcAddressVDAM [bb ll tt]
get FcAddressVDAM
Returns:
(terse)
bb ll tt
(verbose) FCAddressVDAM = bb ll tt