ATTO Technology FibreBridge 2200D, Software Manual

Page: 23 / 66

ATTO Technology, Inc. ATTO FibreBridge Software Manual
- -
18
ATTO Technology, Inc.
Set/Display the current subnet mask. If IPDHCP is enabled, then the get command reports the
current IP gateway assigned by the nameserver.
EthernetSpeed
Syntax: set EthernetSpeed [10 | 100 | auto]
get EthernetSpeed
Returns
(terse)
[10 | 100 | auto ([10|100|UNKNOWN])]
(verbose) EthernetSpeed = [10 | 100 | auto ([10|100|UNKNOWN])]
Set/Display the ethernet speed. Auto will auto-negotiate speed (default).
If Auto is enabled the value in parentheses indicates the current speed of the ethernet
connection.
Miscellaneous Commands
Info (Immediate)
Syntax: Info
Returns:
(terse) "ATTO FibreBridge XX00"
"xxxx"
"xxxx"
"
Month Day Year 'Build Time'
"xx"
"x.xx"
"x.xx.xx"
"[SE | HVD | LVD]"
"[SE | HVD | LVD]"
(verbose) Device = "ATTO FibreBridge"
Device Version = xxxx
Device Build
= xxxx
Build Date = Month Day Year 'Build Time'
NVRAM Revision = xx
CLI Revision = x.xx
FC Firmware Revision = x.xx.xx
SCSI Port 1
= "[SE | HVD | LVD]"
SCSI Port 2 = "[SE | HVD | LVD]"
This option displays version numbers and other product information for key components within
the ATTO FibreBridge.
Help (Immediate)
Syntax: Help [Command Name]
Returns:
(terse)
usage
(verbose) usage + help text…
The Help command displays a list of available commands. When the optional command name is
present, detailed command-specific information will be displayed.