ATEN VK1100, User Manual

Page: 80 / 176

ATEN Control System User Manual
70
Design
The Design tab is for creating a Viewer – the user interface that controls the
hardware from a mobile device or keypad. Create a viewer and add the pages
to control the hardware according to the setup you are installing.
Viewer Settings The Viewer Settings page appears if no viewer has been created
so that you can set the Viewer Properties. The viewer properties
must be set before you begin configuring the viewer’s pages. When
you are finished, click
Done to begin designing the viewer pages.
See Select Viewer , page 71, for details.
Left Sidebar The left sidebar lists each viewer and its pages.The sidebar allows
you to add viewers and pages. These options become available
after clicking
Done on the Viewer Settings page. See Left Sidebar ,
page 61, for details.
Library Click this icon to open the Library which provides access to the
Graphic (page 102), Flag (page 105), Monitor (page 107) and
Macro (page 120) options.
Simulator The Simulator button is used to test a viewer’s interface after it has
been created. The simulator allows you to tryout the interface as it
would work on a mobile device but without actually controlling
devices. Use the mouse to click through the page links.
Select Viewer The Select Viewer section allows you to configure the basic
settings and type of viewer you want to create. See
Select Viewer ,
page 71, for details.