ATEN VK1100, User Manual

Page: 173 / 176

Appendix
163
Specifications
VK2100
Function VK2100
Interface Serial 4 x Programmable Bi-directional RS-232/422/
485 Ports (4 x DB9 Male Connectors,
Configurable via Pin Assignments)
Baud Rate: 300 to 115200 (default: 9600)
Data Bit: 8 (default) or 7
Stop Bit: 1 (default) or 2
Parity: None (default), Even or Odd
Flow Control: None (default) RTS/CTS
2 x Bi-directional RS-232 Ports (2 x 3-Pole
Terminal Block Connectors)
Baud Rate: 300 to 115200 (default: 9600)
Data Bit: 8 (default) or 7
Stop Bit: 1 (default) or 2
Parity: None (default), Even or Odd
IR/Serial 4 x Programmable IR / Uni-directional RS-232
Ports (2 x 4-Pole Terminal Block Connectors)
IR: TTL level (0 to 5 V)
Carrier Frequency: 10KHz~455KHz
Serial: Uni-directional RS-232 ( + - 5 V)
Baud Rate: 300 to 115200 (default: 9600)
Data Bit: 8 (default) or 7
Stop Bit: 1 (default) or 2
Parity: None (default), Even or Odd
I/O 4 x Programmable Digital Input / Output
Channels (1 x 5-Pole Terminal Block
Connector)
Digital Output: 250 mA sink from 12 VDC
Digital Input:
VDC Mode
Input Voltage Range: 0 to 24 VDC
Programmable Range: 1 to 24 VDC
Dry Contact Mode:
Pull-up 2k ohms to + 12 VDC
Relay 4 x Relay Channels (2 x 4-Pole Terminal Block
Connector)
Normally Open, Isolated Relays
Contact Rating: Max 24 VDC, 2A
VDC 4 x 12 VDC Output Ports (2 x 4-Pole Terminal
Block Connectors)
Power Supply: 12 VDC, 2A Max (Shared By 4
Ports)
Connectors Ethernet 1 x RJ-45 Female, 10/100Base-T
USB 1 x USB Type A Female (White)
Power 1 x 3-prong AC power socket