ATEN VK1100, User Manual

Page: 122 / 176

ATEN Control System User Manual
112
Use the drop-down menu and enter a string of that will represent the
characters in a return message from the serial device:
Š
Select string with fixed length
Use this to set a string of characters that are set within a fixed
parameter. Enter a string of characters and use the
S to set the start of
the string and E to set the end and then click Apply . The return
message will need to fit the fixed string of characters set in the text
box next to the
Drop-Down Menu (see next page) for the monitor to
be triggered.
Š
Select string with a non-fixed length
Use this to set a string of characters where the parameters are
variable. Enter a string of characters and use the
S to set the start of
the string and E to set the end and then click Apply . The return
message will need to fit the fixed string of characters set in the text
box next to the
Drop-Down Menu (see below) for the monitor to be
triggered.
Š
Drop-Down Menu
Above, enter characters that the Select string with fixed length or
Select string with non-fixed length string must match and how they
must be matched: Equal to , Not equal to , Include , or Exclude for
the condition to be triggered.
„
Flag
Creates a flag condition for the monitor. Use the drop-down menus to
set a format (how the flag value must be matched) and the flag value for
the condition to be triggered.