ATEN VK1100, User Manual

Page: 21 / 176

Chapter 1. Introduction
11
VK1100 Front View
No. Component Description
1 Relay LED The LED lights green to indicate an active device
connection (closed loop).
2 IR/Serial LED The LED lights green to indicate an active device
connection and IR/Serial signals are being transmitted.
3 Serial LED The LED (1~2) lights green to indicate serial signals
are being transmitted.
4 Ethernet Link / ACT
LED The LEDs provide information about the network
connection:
Š
Link : The LED blinks green to indicate Ethernet sig-
nals are being transmitted.
Š
ACT : The LED lights green to indicate 100Mbps
transmissions.
5 DC Output Overload
LED The LED lights orange to indicate DC output exceeds
maximum output.
Note: When the LED lights orange, please unplug any
of the connected devices to keep its total output under
12W.
6 IR Receiver / LED This IR receiver passes the functions of a remote
control to the VK1100 in learning mode. The distance
between the IR remote and the receiver window
should be kept under 10cm with a direct line of sight.
Š
The LED blinks green to indicate the unit is ready to
receive signals from an IR remote control.
7 USB Port / LED This is where a USB device plugs in to upload Viewer
files to the VK1100.
Š
The LED blinks green to indicate Viewer files are
being uploaded, and lights green to indicate a
successful upload of Viewer files.
Š
The LED lights orange to indicate Viewer files failed
to upload.
1 2 3 5 6 7 8 4 9 10