ATEN VK1100, User Manual

Page: 91 / 176

Chapter 5. ATEN Configurator (VK6000)
81
Š
Mode – use the drop-down menu to select the button type:
Š
Basic Slider Bar for a bar where you enter the minimum and maximum
values to calculate the range and levels on a slider bar, and then add
one command to configure the Basic Slider Bar’s action (See
Slider
Value , page 89). Choose options under Value to configure the slider
bar’s range:
Š
ASCII / HEX – click a radio button to select the format for the
slider bar values.
Š
Minimum – enter the lowest level on the bar.
Š
Maximum – enter the highest level on the bar.
Š
Level – this represents the number of levels on the slider bar. You
can calculate the value of each level with the formula: Maximum
Value - Minimum Value / Level = Value Per Level . The Level is
automatically calculated according to the Minimum and
Maximum values you enter.
Š
Advanced Slider Bar for a bar where you set the number of levels and
add a command for each level in the bar (see Level, in the table, on
page 84). Choose options under Value to configure the slider bar’s
range:
Š
Level – this represents the number of levels on the slider bar. For
each level you must add a separate command in the Slider Bar
Action – Commands list (see Level , in the table, on page 84).
Š
Direction – sets the bearing of the slider bar. Options are Vertical or
Horizon .
Š
Style – click the drop-down menus to select the Foreground Color and
Background Color for the slider bar.
Š
Position and Size – depending on whether the bar is set Vertical or
Horizontal you can use either the Size : Width or Height box to enter a
number to resize the length of the slider bar.