ATEN VK1100, User Manual

Page: 118 / 176

ATEN Control System User Manual
108
The table below provides a description of the Monitor page options.
Type Use this drop-down menu to select:
If – select this option for a single condition monitor. “If” the single
condition is met, the action initiates.
Switch – select this option for multiple conditions that use more
than one “If” conditions for the monitor. In this type, if one of the
conditions is met, the monitor will initiate the action.
Name Enter a unique name for the monitor.
Query Frequency Use this drop-down menu to select how frequently the monitor
checks a device for a signal. Options are: 100 ms - 1 second.
Condition This section is for adding the condition that will need to be met for
the Action to initiate. To add a condition:
1. Select a monitor under Device .
2. Add a device port under Status to the Condition List.
3. Configure the condition settings by double-clicking the device
port in the Condition List.
Use the Type drop-down menu to select from two condition types:
If or Switch . Both are configured similarly, but with Switch you can
add multiple comparison conditions called Cases, each of which
can initiate the Action.