ATEN VK1100, User Manual

Page: 18 / 176

ATEN Control System User Manual
8
Components
VK2100 Front View
No. Component Description
1 Relay LED The LED lights green to indicate an active device
connection (closed loop).
2 IR/Serial LED The LED lights green to indicate an active device
connection and IR/Serial signals are being transmitted.
3 I/O LED The LED lights green to indicate an active device
connection and I/O signals are being transmitted.
4 Serial LED The LED (1~6) lights green to indicate serial signals
are being transmitted.
5 Ethernet LED The LEDs provide information about the network
connection:
Š
Link : The LED blinks green to indicate Ethernet sig-
nals are being transmitted.
Š
ACT : The LED lights green to indicate 100Mbps
transmissions.
6 DC Overload LED The LED lights orange to indicate DC output exceeds
maximum output.
Note: When the LED lights orange, please unplug any
of the connected devices to keep its total output under
24W.
7 IR Receiver / LED This IR receiver passes the functions of a remote
control to the VK2100 in learning mode. The distance
between the IR remote and the receiver window
should be kept under 10cm with a direct line of sight.
Š
The LED blinks green to indicate the unit is ready to
receive signals from an IR remote control.
1
10
5 2 4
3 6 7 8 9