manualshive.com logo in svg

ATEN VK1100, User Manual

Share
Download
ATEN VK1100 User Manual Download Page 52

ATEN Control System User Manual

42

Licenses

The 

Licenses 

tab allows you to upload and view license information. 

Firmware

Displays the Current Firmware version and option to upgrade. 

Click 

Update Firmware

 to open the

 Firmware Upgrade

 window. 

Click 

Browse

 to select the firmware upgrade file.

When 

Check FW Version

 is selected, the system will check the 

current firmware version against the one being used to upgrade the 
Control Box. If the device version is higher than the upgrade 
version a dialog box informs you and gives you the option to 
continue or cancel.

After the file has been selected, click 

Update

 to start the firmware 

upgrade. 

Licenses 

This section shows information about the licenses that are available 
on the Control Box. A license is used each time a mobile device 
connects to the Control Box to control devices.

 In Use

 displays the 

number of licenses being used by mobile devices. 

Not in Use 

displays the number of licenses available for use. 

Total

 shows the number of licenses purchased for use on the 

Control Box. 

Add

Clicking 

Add

 opens the

 Add License

 window to upload new 

licenses to the Control Box. Click 

Browse

 to locate the license file 

and Add to upload the license(s).

Remove

When a device is accessing the Control Box you can click the 

Remove

 button to disconnect the session. 

Summary of Contents for VK1100

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands