ATEN KN2116v User Manual Download

Page: 113 / 316

Chapter 5. The User Interface

The Java Control Panel

The Java Applet Viewer and Java Client AP Control Panel is similar to the one
used by the WinClient:

The major differences between them are:

In the Macros dialog box,

Toggle Mouse Display

is not available.

The

Dot

mouse pointer type is not available.

In the Message Board, there is no

Show/

Hide

button to show or hide the user list.

This function is achieved by clicking the
arrows at the top of the bar that separates the
User List panel from the Main panel.

In Virtual Media, only ISO and Folder are
supported. See

Java Applet Viewer / Java Client AP

, page 291 for further

details.

The Control Panel

Lock LED

icons are not in sync with your keyboard.

When you first connect, the LED display may not be accurate. To be sure,
click on the LED icons to set them.

Control Panel Configuration

, the BMP Snapshot format has been

replaced by PNG.

Summary of Contents for KN2116v





























































































































































































































































































































Search results

Summary of Contents for KN2116v

Reviews:

Related manuals for KN2116v

Brands by name

Popular brands

ATEN KN2116v, User Manual

Search results

Summary of Contents for KN2116v

Reviews:

Related manuals for KN2116v

Brands by name

Popular brands